Layer 2, PoE switch with (5) GbE RJ45 ports, including (4) 802.3at PoE+ ports and (1) 802.3bt PoE++ input.
The Switch Flex (USW Flex) is a fully managed, Layer 2 switch with (5) GbE RJ45 ports, including (4) GbE, 802.3at PoE+ ports and (1) 802.3bt PoE++ input. Each of the USW Flex's PoE ports can provide up to 15 W of power to your UniFi access points and PoE devices. When powered by a 802.3bt PoE++ switch [e.g., USW Pro 48 PoE, USW Pro 24 PoE, US XG 6 PoE, and USW Industrial switches (all sold separately)], the USW Flex can yield a 46W total PoE supply. The USW Flex sports weatherproof housing and offers a variety of mounting options. This switch can also be monitored or configured from anywhere with the powerful, intuitive UniFi Network web application and mobile app.
Features:
- (1) GbE, 802.3bt PoE++ RJ45 input
- (4) GbE, 802.3at PoE+ RJ45 ports
- Up to a 46W total PoE supply*
- Weatherproof design
- Multiple mounting options
*When powered with a PoE++ switch or a 60W PoE injector (sold separately).
Managed with the UniFi Network application: Version 5.10.3 and later
| USW-Flex | |
|---|---|
| Dimensions | 122.5 x 107.1 x 28.0 mm (4.82 x 4.22 x 1.10") |
| Weight | 230 g (8.11 oz) |
| Networking Interfaces | (5) 10/100/1000 Mbps RJ45 Ports |
| Management Interface | Ethernet In-Band |
| PoE Out (Ports 2-5) | 802.3af (Pins 1, 2+; 3, 6-) |
| Max Power Consumption (Excluding PoE Output) | 5W |
| Max PoE Wattage Per Port | 15.4W |
| Total PoE Power Budget Powered by 802.3af Powered by 802.3at Powered by 802.3bt Powered by PoE Adapter (Enabled in Controller) | 8W 20W 46W 46W |
| Voltage Range 802.3af 802.3at/bt | 44 - 57V 50 - 57V |
| LEDs System RJ45 Data Ports | Status PoE; Link/Speed/Activity |
| ESD/EMP Protection | ?? 16kV Air, ?? 16kV Contact |
| Operating Temperature 46W PoE Output 25W PoE Output | -40 to 55?? C (-40 to 131?? F) -40 to 65?? C (-40 to 149?? F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| Power Method (Port 1) | |
| PoE Type 802.3af/at (Pins 1, 2+; 3, 6-) 802.3bt (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-) 50V/60W PoE Adapter* | Recommended PoE Source USW-24-PoE (sold separately) USW-Pro-24-PoE (sold separately) PoE Injector, POE-50-60W-WH or POE-50-60W (sold separately) |
| USW-Flex-Utility** | |
| Dimensions (with Mount) | 249 x 218 x 60 mm (9.80 x 8.58 x 2.36") |
| Weight (with Mount) | 740 g (26.10 oz) |
| USW-Flex-Utility 60W PoE Adapter | |
| Dimensions | 118.5 x 63 x 34.7 mm (4.66 x 2.48 x 1.36") |
| Weight | 206 g (7.27 oz) |
| Output Voltage | 54V, 1.11A |
| Rated Voltage | 100-240VAC |
| Input Current | 1.5A (Max.) |
| Efficiency | > 86% |
| Output Ripple | 200mVpp |
| Line Regulation | < 1% |
| Load Regulation | < 3% |
| 4-Pair Powering | Pins 1, 2, 4, 5+ and Pins 3, 6, 7, 8- |
| Operating Temperature | -20 to 60 ? C (-4 to 140 ? F) |
| Storage Temperature | -30 to 70 ? C (-22 to 158 ? F) |
| Operating Humidity | 5 to 90%, Noncondensing |
| Surge Immunity | 4kV Difference and Common Mode |
* To enable PoE output power, select Power Source PoE Injector in UniFi Application.
**Accessory sold separately.
