| Description | |
| Manufacturer: | Cisco Systems, Inc |
| Manufacturer Part Number: | AIR-PWRINJ-60RGD1= |
| Manufacturer Website Address: | http://www.cisco.com/c/en_au |
| Brand Name: | Cisco |
| Product Line: | Aironet |
| Product Name: | Aironet PoE Injector |
| Marketing Information: | The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point. The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable. The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG. The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter. A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, and another shielded, outdoor cable carries power and data to the access point's Ethernet port. The power injector's AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal and vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements. |
| Product Type: | PoE Injector |
| Technical Information | |
| Protection Type: | Surge Protection |
| Power Description | |
| Maximum Output Voltage: | 55 V DC |
| Maximum Output Current: | 2 A |
| Maximum Output Power: | 60 W |
| Interfaces/Ports | |
| Input Ports: | 1 x Ethernet |
| Output Ports: | 1 x Ethernet |
| Physical Characteristics | |
| Mount Type: | Pole/Wall-mountable |
| Height: | 69.9 mm |
| Width: | 149.9 mm |
| Length: | 213.9 mm |
| Weight (Approximate): | 1.35 kg |
| Miscellaneous | |
| Compatibility: | Cisco Aironet 1560 Series Outdoor Access Points |
BUILD AT HOME
80% Arms sells AR-15 and .308 80% Lower Receivers, 80% Lower Jigs and other accessories which allow you to legally build a firearm at home in most states.
INCREDIBLY PRECISE
We utilize state of the art 5-axis CNC machines to mill all our .308 and AR-15 80 percent lower receivers to incredibly precise tolerances using premium billet aluminum.
RIDICULOUSLY EASY
We also offer our patented AR-15 and .308 Easy Jigs® which is the first 80% lower jig that makes it ridiculously easy for a non-machinist to finish their 80% lower in under 1 hour with no drill press required.
100% SATISFACTION GUARANTEED
Products manufactured by 80% Arms carry a lifetime warranty against manufacturing defects. We will promptly replace or repair any product that we determine to be defective.
CISCO (AIR-PWRINJ-60RGD1=) Power Injector, 60W, outdoor, North America plug
Cisco
$1,952.73
$866.81
(You save
$1,085.92
)
